Metering nozzle,Nozzle Refractory,Ladle Nozzle,Tundish Nozzle,Lower Nozzle,Upper Nozzle

Metering nozzle

The Zr metering nozzle manufactured by this company is specially used for the tundish gating system without plug stick in the small square-base continuous casting machine, and it is more suitable for multi-thread and small square-base continuous casting machine. All nozzles adopt special-type and high-quality refined raw materials with reasonable structure and strong erosion resistance. In the entire course of pouring, there is little change in diameter of the nozzle with stable speed. Nozzles of the mosaic type, combined type and entire difference type can also be provided as required by customers.

Ladle Nozzle,Nozzle Refractory

Ladle Nozzle

Introduction:

Ladle Nozzle are made from corundum, bauxite, flake graphite, antioxidant and phenolic resin formed on heavy duty presses in harden steel or carbide die by using white fused alumina. To obtain maximum packing density, nozzles are fired at extremely high temperature in order to increase corrosion resistance to metal and slag the fired nozzles are further processed.

 

Ladle Nozzle,Nozzle Refractory

Ladle Nozzle

Introduction:

Ladle Nozzle are made from corundum, bauxite, flake graphite, antioxidant and phenolic resin formed on heavy duty presses in harden steel or carbide die by using white fused alumina. To obtain maximum packing density, nozzles are fired at extremely high temperature in order to increase corrosion resistance to metal and slag the fired nozzles are further processed.

Ladle Nozzle,Nozzle Refractory

Ladle Nozzle

Introduction

Ladle Nozzle are made from corundum, bauxite, flake graphite, antioxidant and phenolic resin formed on heavy duty presses in harden steel or carbide die by using white fused alumina. To obtain maximum packing density, nozzles are fired at extremely high temperature in order to increase corrosion resistance to metal and slag the fired nozzles are further processed.

Nozzle,Nozzles Refractory,Nozzle Manufactur|Luoyang Yilong Refractory Co,Ltd

Ladle Nozzle

Introduction

Ladle Nozzle are made from corundum, bauxite, flake graphite, antioxidant and phenolic resin formed on heavy duty presses in harden steel or carbide die by using white fused alumina. To obtain maximum packing density, nozzles are fired at extremely high temperature in order to increase corrosion resistance to metal and slag the fired nozzles are further processed.

Advantages

They show the features of excellent thermal shock resistance, good excellent corrosion and erosion resistance, strong cracking resistance, long service life etc.

Application

These products have been widely used in steel plant.

The requirements of refractory sliding nozzle

Sliding nozzle mainly stalled in the bottom of ladle, whose applied condition has got a big improvement comparing with plug, as its refractory part does not soak in molten steel for a long time. To sliding nozzle, slide gate is the key section, as its quality influences life span of nozzle directly.

The lower/upper nozzle only as a role of alleyway for steel running, but the upper nozzle is required to resist high temperature and eroding, which has the same life span of ladle well block. The lower nozzle is only used for one time, so which holds less demand than upper nozzle.

Both of upper/lower sliding plate are beard fastening pressure, and also required to slid and no molten steel overslow between them when pouring. So it is required to take finish machining to slip plan of upper and lower sliding plate, to make sure high parallelism and smoothness, besides, both of them are required rather high mechanical property.

Now the material of sliding plate mainly include: High alumina, Magnesia, Aluminum silicon carbide, Aluminum chromium, Aluminum carbon, and Aluminum zirconium carbon.

Above materials can be made into burned and unburned skateboarding brick.

As high quality sliding plate is expensive, one can choose  compound sliding plate, which is more appliable and economical.